The DABA type varnish glazer is meant for glazing plates with nitrocellulose, polyester, water, and pigmented varnishes. The glazer can be installed in a varnishing-drying line or it can be plugged into a socket.
Acharacteristic feature of DABA type glazers are the slide-out supply systems. Such systems are composed of the: head, tank, gutter and a hydraulic varnish circulation system. The DABA – II – 130 varnish glazer has two supply systems, whereas the DABA – I – 130 glazer has one. The glazer’s supporting structure is made up of frames, composed of three segments (DABA – II) connected to two segments (DABA – I) on a side. Rollers and conveyor belts can be found in the frame. The conveyor is powered by an electric motor through variable transmission and a belt. The slide-out supply system makes it possible to quickly replace it during cleaning or varnish change.
| TECHNICAL AND OPERATIONAL DATA: | DABA-I-130 | DABA-II-130 | |
| Maximum width of conveyed elements | mm | 1300 | 1300 |
| Minimal length of coated elements | mm | 380 | 380 |
| Length of head slit | mm | 1350 | 1350 |
| Work height (distance from floor to table) | mm | 850 | 850 |
| Number of heads | qt | 1 | 2 |
| Head lift height | mm | 200 | 200 |
| Width of head slit | mm | 0-3,5 | 0-3,5 |
| Rate of advance | m/min | 30-120 | 30-120 |
| Varnish tank capacity | dcm3 | 60 | 60 |
| Placement range | g/m2 | 70-700 | 70-700 |
| Pump output with viscosity 30 – 50 s Ford Ø 4 | dmc3/min | 30 | 30 |
| Power of pump electric motor | kW | 1,1 | 2x1,1 |
| Power of conveyor drive motor | kW | 1,5 | 2,2 |
| Glazer mass | kg | 1300 | 2100 |
| Maximum overall dimenisons (length x width x height) | mm | 3550x2310x1410 | 4910x2310x1410 |